Sd822 Series 190cm Water Jet Loom Machine With Double Nozzle And Plain Shedding.
DESCRIPTION
Sd822-190cm Water Jet Loom Machine Is A Type Of High Efficient Weaving Machine. With This Loom , Two Types Of Different Weft Yarns Are Capable To Be Woven On It. It Is Designed To Produce Plain Weave Construction Fabrics .
MODEL |
SD822 |
LOOM WIDTH |
190CM / 75INCH |
APPLICABLE WEAVING WIDTH |
40 ~ 70 INCH |
SPEED |
600 ~ 800 RPM (ACTUAL SPEED) |
WEAVING PATTERN |
PLAIN WEAVE |
APPLICATION
You Can Freely Use Following Yarns (Included But Not Limited) On Our Water Jet Loom According To Your Requirement .
1 |
FDY |
2 |
DTY |
3 |
ATY |
4 |
ROTO |
5 |
CATIONIC |
6 |
SPUN |
7 |
SPANDEX |
8 |
MICRO |
9 |
HIGH STRETCH YARN |
10 |
NYLON |
11 |
VISCOSE |
12 |
METAL FILAMENT |
13 |
MONO-FILAMENT |
And End Product Will Be Plain Weave Structure Like Pongee , Taffeta , Chiffon Etc .
The Main Advantages With Drde Water Jet Loom Machine .
And They Are Also Advisable To You Sirs ….
1. High Speed Weaving
2. High Efficiency Weaving Above 95%
3. The Main Frames Of Our Sd822 Series Water Jet Loom Machine Are Made Of 250 Degree Steel, High Rigidity; And Two Pieces Of Frame For One Set Loom Will Be Processed At The Same Time By Imported Cnc Machine To Ensure Perfect Horizontal Level Match And Precise Tolerance. Main Frames Are The Base Body To Mount And Hold All Other Parts , Without A Strong And Steady Body , It Will Be Like A Palace Built On Sand , Failure Is Doomed .4. 4. Gears, Yes , Gears Are Like The Heart To The Water Jet Loom Machine . With Every Loom , The Main Motor Generates Motion Power , While The Gears Will Digest And Create Mechanic Motion . This Is Power Source . With Drde Water Jet Looms , We Select And Use Qt700 Grade Gears Which Is Top Standard Gears . It Is Hard-Worn And Precise Tolerance And Excellent Treatment Same As Gears Used In Automobile Industry , Which Combined Delivers Stable Motion Power To Different Parts Of The Loom .
5. Rear-Top Support Is The Part Shown In The Above Picture . This Is Seat For Leno Assembly . It Is Also The Balancing Support For One Set Of Water Jet Loom Machine . With Most Suppliers , A “L-Shaped” Bar Is Applied In This Position , But Many Years Of Experience Told Us Such Design Is Unable To Fully Digest The Vibration And Is Resounding Due To High Speed Weaving , And Thus Leno Assembly Is Shaking, Causing Problems To The Selvage And More Importantly The Leno Assembly Got Easily Worn Out And Damaged In Short Time . Therefore, We Introduced 5-Angle Pipe Type Support To Avoid The Serious Vibration Here . It Is Proven Now That This Design On Water Jet Looms Effectively Reduces The Vibration, Therefore , Enhancing The Leno Assembly Parts Life And Better Gradation Of Cloth Woven .
More Advantages Are Available With Our Sd822 Series Water Jet Loom Machine , Pls Do Contact Us For More Details .
Thanks
Robert